TAU T-ONE Series
The T-ONE series of gear motors has been designed to automate any kind of sliding gate for residential or condominium use, with leafs weights of up to 1,763 lb lb (800 kg). The T-ONE 12 V version (350T-ONE5B) works during power cuts; the control panel houses the rechargeable emergency batteries. These low voltage versions are suitable for intensive use. All motors are irreversible to avoid unauthorized opening but all Speed operators have a practical manual release protected by a personal key. Rapid and automatic travel programming. Improved safety thanks to the Pre-flashing function which indicates leaf movement in advance.
350T-ONE3 - 24 V sliding gate operator with encoder, complete with electronic control unit and built-in 433,92 MHz single-channel radio receiver. Max. load 661.39 lb
350T-ONE5B - 12 V operator with encoder, complete with electrical control panel and two-channel 433,92 Mhz built-in radio receiver. Max. load 1,102 lb
350T-ONE8 - 230 V operator complete with electrical control panel and two channel 433,92 Mhz built-in radio receiver. Max. load 1,763 lb
Download 350T-ONE3 Series Brochure
Download T-ONE Series Brochure
Download T-ONE Series Installation Manual
Master is a new gate operator for sliding gates that is suitable for heavy use such as apartment blocks, companies, barracks and institutes in general. This low voltage electromechanical motor guarantees operating continuity even under the more intense conditions. The control unit with battery charger has a location for the optional rechargeable 12V battery that ensures the operation of the system even in the event of blackout. The operation of the system can be electronically controlled by means of an encoder, which memorizes the deceleration of the gate, and programs the anti-crushing safety device based on the weight of the gate.
500MASTER12Q - 12 V operator with encoder, complete with electrical control panel Max. load 2,645 lb
Download Master Series Brochure
Download Master Series Installation Manual